Mission Centrifugal pump-Magnum Sandmaster Pump parts list-Shorten frame centrifugal pump

SANDMASTER series pumps are more compact in design and can be adapted for hydraulic motor drive.These features make .SANDMASTER series pump ideal for use in applications such as oilfield frac trucks as well as blending and pump charging for water well drilling applications.

All parts for these pumps are identical to the Magnum series pump except for the frame and shaft.The frame and shaft have been shortened 4" to reduce the length of the pump.When space is a premium and prime mover options are limited, the SANDMASTER series pump is the pump of choice.

There are 8 models for choosing, 3×2×13, 4×3×13, 5×4×14,6×5×11, 6×5×14, 8×6×11, 8×6×14, 10×8×14. 

ITEM	QTY	PART No.	DESCRIPTION	MATERAIL	WEIGHT kg
1*	1	See below	Casing	MT-4
1A	1	10399-46-1	Gasket,casing	Vellumoid	0.01
1B	12	3932-61	Nut,casing	Stl	0.05
1C	12	3862-76	Stud,casing	Stl	0.16
1D	1	8505-04-01	Plug,Casing Drain	Stl	0.03
1E	1	8505-04-01	Plug,flush line	Stl	0.03
2*	1	See below	Impeller	MT-4
2A	1	19110-72	Seal,impeller	Viton	0.002
2B	1		Washer,impeller	Stl	0.02
2C	1		Bolt,impeler lock	Stl	0.15
3*#	1	22223-01-30	Stuffing box,mech.seal	MT-4	20
3*&	1	20614-01-30	Stuffing box,packed	MT-4	20
3A	2	3861-117	Bolt,stuffing box	Stl	0.05
4	1	20622A	Gland assy,packing	Stl 304	1
5A#	1	22451-1	Seal,mechanical	Tung/Tung	1
5A#	3		Packing, Shaft - M.S. Backup	Kevlar	0.4
5A#	5		Packing, Shaft - w/latern ring	Kevlar	0.7
5A	1	Ring, Latem	Bronze	0.3
6	2	B3701A	Bolt assy,gland	Stl 304	0.15
7	1	20612-02-33D	Shaft	42CrMo	17
7A	1	20943-04A	Sleeve,shaft	38CrMoAl	1
7B	1	4371-5-21	Key,shaft	Stl	0.11
7C	1	23444-01-72	Seal,shaft sleeve	Viton	0.005
7D	1		Oil thrower & Stop pin	Stl	0.8
8	1	22210-1A	Deflector assembly	Composite	0.4
9	1	20938-02-01	Frame,grease lubricated	Cast iron	80
9C	1	8505-04-01	Plug,frame drain	Stl	0.033
9D	1	8267-01	Breather	Stl	0.2
9G	3	2538-1H	Bolt,casing jack	Stl	0.16
10A	1	20626	Cover,inboard bearing	Iron	2.6
10B	1	20625	Gasket,I.B.Brg.Cover	Vegetable fiber	0.01
10C	1	20619-01	Oil seal, I.B.Brg.Cover	Buna-n	0.06
10D	2	3861-1	Bolt, I.B.Brg.Cover	Stl	0.03
10E	2	3932-2	Nut, I.B.Brg.Cover	Stl	0.007
10H	1	19368-01	Grease fitting	Brass	0.01
11	1	20615-1	Bearing,inboard	Vendor	2.1
12	1	20624-01-01	Housing,O.B.bearing	Iron	6
12*	1	2224-01-43	Housing,O.B.bearing	Iron	6
12A	1	7496-253	Seal, O.B.Brg.housing	Buna-n	0.01
12B	4	3861-138	Bolts, O.B.Brg.housing	Stl	0.05
12C	2	3932-62	Nut, O.B.Brg.housing jam	Stl	0.016
13	1	20617A	Cover,O.B.Bearing	Iron	1.8
13A	1	19368-01	Grease zerk, O.B.Brg.Cover	Brass	0.01
13B	1	7496-26	O-ring, O.B.Brg.Cover	Buna-n	0.001
13C	1	20619-02	Oil seal, O.B.Brg.Cover	Buna-n	0.04
13D	2	3861-139	Bolt, O.B.Brg.Cover	Stl	0.025
14	2	20616-1	Bearing, O.B.	Vendor	1.5
14A	1	6124-4	Lockwasher,O.B.Bearing	Stl	0.01
14B	1	6123-4	Locknut, O.B.Bearing	Stl	0.22
1*	1	19203-01-30A	Casing,3×2×13	MT-4	55
1*	1	19205-01-30A	Casing,4×3×13	MT-4	57
1*	1	19222-01-30A	Casing,5×4×14	MT-4	85
1*	1	19122-01-30A	Casing,6×5×11	MT-4	90
1*	1	19123-01-30A	Casing, 6×5×14	MT-4	95
1*	1	19763-01-30A	Casing, 8×6×11	MT-4	97
1*	1	19117-01-30A	Casing,8×6×14	MT-4	125
1*	1	20937-01-30A	Casing,10×8×14	MT-4	155
2*	1	19204-XX-30	Impeller,3×2×13	MT-4	9
2*	1	19206-XX-30	Impeller,4×3×13	MT-4	12.5
2*	1	19224-XX-30	Impeller,5×4×14	MT-4	13
2*	1	19121-XX-30	Impeller,6×5×11	MT-4	14
2*	1	19121-XX-30	Impeller, 6×5×14	MT-4	18
2*	1	19116-XX-30	Impeller, 8×6×11	MT-4	18
2*	1	19116-A0-30	Impeller,8×6×14	MT-4	20
2*	1	21867-XX-30	Impeller,10×8×14	MT-4	20

Note：1. XX－Impeller code－Firsr X equals diameter of impeller in inches minus 4.Therefore 10″ = 6, 9″ = 5 etc…14″ use lettet A;

2. Second X equals fractional data in 1/8′s. Therefore 1/8″ = 1, 1/4″ = 2 , etc…Thus a 10.5″ impeller is coded as 64, 12 ″ impeller is coded as 80, 13.25 ″ impeller is coded as 92 etc…

3. YYY－the metric diameter of impeller，therefore 12″ is coded as 305mm，11″ is coded as 280m.

Welcome to contact Amber for pump and part inquiry amber@linhaievergrow.com